Information Technology Services, UIS 4
DISPLAY CONTRAST SETTINGS
1. Press the settings button.
2. Press 1 for Contrast, or press the Select soft key to choose the Contrast option.
3. Use the Up or Down soft key to change the contrast.
4. Press the Ok soft key to save any changes. Press the Cancel soft key to overwrite
changes.
5. Press the Save key to apply changes. To exit without applying changes, press the
Exit soft key.
CHOOSE RING TONE
You may set different ringtones for different lines.
1. Press the settings button.
2. Press 2 to select the Ring Type option on the Settings menu.
To Next Page
Loading...
