1-17
Cisco IR829 Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Antennas
Table 1-7 lists the supported 7 in 1 antenna configuration for transportation for Cisco IR829.
Note In the following use cases, Lightning Arrestors are not required, and the Radio Modules are:
IR829GW-LTE-GA-EK9
IR829GW-LTE-GA-ZK9
IR829GW-LTE-NA-AK9
IR829GW-LTE-VZ-AK9
Ta b l e 1-7 7 in 1 Antenna Configuration for Transportation
WiFi Use Case 9:
Dual Band, Dual
Element, Wall
Mounted Antennas
Dual Band
Simultaneous
802.11n 2x2 MIMO
WiFi
Connectors:
2x RP-TNC (jack)
N/A N/A N/A 1x Dual Band, Dual Element
per Band, Omni, 18" LONG
RG-58 cables with RP-TNC
(plug), 2.0dBi @ 2.4 GHz (2
ports), 3.0dBi @ 5 GHz (2
ports)
• 07-1071-02
• AIR-ANT2451V-R
WiFi Use Case
10:
Dual Band Front
Panel Mounted
Antennas
Dual Band
Simultaneous
802.11n 2x2 MIMO
WiFi
Connectors:
2x RP-TNC (jack)
N/A N(f) to
N(f),
RF-adapter
qty 2
• 29-1008
18-01
• AIR-AC
C370-
NF-N
F
RP-TNC(plug) to
N(m)-R/A
LMR-240-DB, 5'
qty 2
• 37-1492-01
• AIR-CAB005LL
-R-N
2400-2484MHz,
5150-5875MHz,
WiFi, omni-directional 4 dBi
(2.4 GHz) 7 dBi (5 GHz)
stick antenna indoor /
outdoor with type N(m)
connector,
qty 2
Antennas are IP66, IP67 and
-40 to +70C.
• 07-1126-01
• AIR-ANT2547V-N=
White
— OR qty 2
• 07-1285-01
• AIR-ANT2547VG-N=
Gray
Table 1-6 Supported Dual Band Cisco WiFi Antenna(continued)
Use Case Radio Module Indoor Cable
Lightning
Arrestor or
Adapter Outdoor Cable Antenna