2
Cisco ME 1200 Series Carrier Ethernet Access Devices Hardware Installation Guide
OL-31962-04
Removing SFP Modules 2-11
Connecting to the 10/100/1000 Ports 2-11
Initial Configuration 2-12
Scenario 1 - Zero Touch Provisioning 2-12
Scenario 2 - Accessing Cisco ME1200 NID Through ME3600 UPE NID Controller
Mode
2-12
CHAPTER
3 Installing an AC Power Cord Retainer Clip 3-1
Installing an AC Power Cord 3-2
Installing an AC-to-DC Power Adapter 3-2
Wiring the DC Input Power Source 3-3
Grounding the Switch 3-4
CHAPTER
4 Diagnosing Problems 4-1
Switch Performance 4-1
Speed, Duplex, and Auto-negotiation 4-1
Auto-negotiation and NICs 4-2
Cabling Distance 4-2
Finding the Switch Serial Number 4-2
Technical Specifications A-1
Environmental and Technical Specifications for the Switch A-1
Environmental and Technical Specifications for the Power Adapter A-2
Connector and Cable Specifications B-1
10/100/1000 B-1
SFP Module Connectors B-1
SFP Module Cabling B-2
Cable Pin-outs B-4
Console Port Adapter Pin-outs B-5