MS390 Series Installation Guide
About this Guide
This guide provides instruction on how to install and configure your MS390 series switch. This guide also provides
mounting instructions and limited troubleshooting procedures. For more switch installation guides, refer to
the switch installation guides section on our documentation website.
Product Overview
Models
Model number Description
MS390-24-HW
Stackable Layer-3 24-port Gbe switch with hot-swappable 10G/40G modular
uplinks, hot-swappable power supplies and hot-swappable fans
MS390-24P-HW
Stackable Layer-3 24-port Gbe POE+ switch with hot-swappable 10G/40G modular
uplinks, hot-swappable power supplies and hot-swappable fans
MS390-24U-HW
Stackable Layer-3 24-port Gbe UPOE switch with hot-swappable 10G/40G modular
uplinks, hot-swappable power supplies and hot-swappable fans
MS390-24UX-HW
Stackable Layer-3 24-port mGbe UPOE switch with hot-swappable 10G/40G modular
uplinks, hot-swappable power supplies and hot-swappable fans
MS390-48-HW
Stackable Layer-3 48-port Gbe switch with hot-swappable 10G/40G modular uplinks,
hot-swappable power supplies and hot-swappable fans
MS390-48P-HW
Stackable Layer-3 48-port Gbe POE+ switch with hot-swappable 10G/40G modular
1
To Next Page
Need help?
General