Cisco MX200 G2 User Manual

14
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Receive Call While in Another Call
Add: If your system
is equipped with
the MultiSite option
you may merge the
incoming call with the
existing.
For systems without
MultiSite installed,
the incoming call may
still be merged, but
as an audio-only call
(not shown).
Decline the incoming call
and carry on as you have
been doing.
Accept the incoming call,
while ending the current call
or group of calls.
Accept the incoming
call, while holding the
current call or group of
calls.
The identity of the new
incoming call.
If you already are in a call, you may
accept another incoming call under
certain circumstances.
About the Options
Receive Call

Cisco MX200 G2 Specifications

General

Control	Touch 10 control unit
Video Standards	H.264, H.265
Frame Rate	Up to 60 fps
Ethernet Ports	1 x RJ-45
OS	Cisco Collaboration Endpoint Software
Microphone	Integrated microphone array
Network	Gigabit Ethernet
Video Inputs	HDMI
Video Outputs	HDMI
Audio Standards	G.711, G.722, AAC
Network Protocols	TCP/IP, DHCP, DNS
Audio Inputs	3.5 mm mini jack
Audio Outputs	3.5mm jack
Audio Codecs	AAC-LD, Opus
Mounting	Wall mount
Compatibility	Cisco Webex, SIP