Cisco MX200 G2 User Manual

6
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Video systems located in meeting
rooms and quiet rooms and running
under CUCM (Cisco Unied
Communications Manager) may
allow you to log in to the video
system with your own personal
credentials.
CUCM will then route all incoming
calls destined for you to that specic
video system.
About Hot-desking
Log Onto a System with Your Own Credentials
Introduction to Video Conferencing
Type in your
credentials
and tap Sign In, as outlined.
Tap Sign In, as
outlined.
Select your prole among
those you may choose
between, as outlined.
The system will conrm a
successful sign-in. You will
now receive calls destined
for you.
To sign out tap
Sign-out, as
outlined.
You will be prompted
to conrm your
intentions.

Cisco MX200 G2 Specifications

General

Control	Touch 10 control unit
Video Standards	H.264, H.265
Frame Rate	Up to 60 fps
Ethernet Ports	1 x RJ-45
OS	Cisco Collaboration Endpoint Software
Microphone	Integrated microphone array
Network	Gigabit Ethernet
Video Inputs	HDMI
Video Outputs	HDMI
Audio Standards	G.711, G.722, AAC
Network Protocols	TCP/IP, DHCP, DNS
Audio Inputs	3.5 mm mini jack
Audio Outputs	3.5mm jack
Audio Codecs	AAC-LD, Opus
Mounting	Wall mount
Compatibility	Cisco Webex, SIP