Cisco MX200 G2 User Manual

19
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Hold
Put Call on Hold and Resume a Call on Hold
Assume that
you are in a
call. Tap Hold,
as outlined.
Tap Resume to
go back to the
one you were in
call with (to undo
your action).
Putting someone on hold is typically
something you do as an initial step
when transferring someone to
another person, but it may also be
used when you need to consult a
person or as an alternative to muting
also including stopping the video
transmission.
About Putting on Hold

Cisco MX200 G2 Specifications

General

Control	Touch 10 control unit
Video Standards	H.264, H.265
Frame Rate	Up to 60 fps
Ethernet Ports	1 x RJ-45
OS	Cisco Collaboration Endpoint Software
Microphone	Integrated microphone array
Network	Gigabit Ethernet
Video Inputs	HDMI
Video Outputs	HDMI
Audio Standards	G.711, G.722, AAC
Network Protocols	TCP/IP, DHCP, DNS
Audio Inputs	3.5 mm mini jack
Audio Outputs	3.5mm jack
Audio Codecs	AAC-LD, Opus
Mounting	Wall mount
Compatibility	Cisco Webex, SIP