Cisco MX200 G2 User Manual

26
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
This is a convenient way to obtain
information about all the participants
and their current status.
In addition, you may use the list
to disconnect participants from
the conference or to grant them
certain rights, such as to retain the
position as prominent speaker even
if someone else starts speaking.
These features are outlined on the
following pages.
Using Participant List
Conference Calls with Multiple Participants
View Meeting Participant List
In a call, swipe your
nger horizontally
to the left, as
outlined...
...or tap the little
dot not shown in
white, as outlined.
The list will show all the
participants, who is speaking
for the time being, who is
sharing content (if applicable),
as well as who has been put
on hold (if applicable).

Cisco MX200 G2 Specifications

General

Control	Touch 10 control unit
Video Standards	H.264, H.265
Frame Rate	Up to 60 fps
Ethernet Ports	1 x RJ-45
OS	Cisco Collaboration Endpoint Software
Microphone	Integrated microphone array
Network	Gigabit Ethernet
Video Inputs	HDMI
Video Outputs	HDMI
Audio Standards	G.711, G.722, AAC
Network Protocols	TCP/IP, DHCP, DNS
Audio Inputs	3.5 mm mini jack
Audio Outputs	3.5mm jack
Audio Codecs	AAC-LD, Opus
Mounting	Wall mount
Compatibility	Cisco Webex, SIP