Cisco MX200 G2 User Manual

45
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.
Preset editing is all about taking an
existing preset, altering it and then
saving it under the same name.
If you want to change the name,
we recommend that you delete the
preset and create a new one with
the preferred name.
Edit Existing Camera Position Preset
About Preset Editing
Tap Camera, as outlined, to
see the eects of your camera
adjustments.
Adjust Pan, Tilt and Zoom,
as required.
Tap Selfview to activate it.
Tap the little arrowhead of
the preset to be edited.
Pan
Tilt
Zoom
Tap anywhere
outside the menu to
close it.
Camera
Tap Update to current
position to put your
changes into eect, as
outlined.
To delete an existing preset
tap Remove.

Cisco MX200 G2 Specifications

General

Control	Touch 10 control unit
Video Standards	H.264, H.265
Frame Rate	Up to 60 fps
Ethernet Ports	1 x RJ-45
OS	Cisco Collaboration Endpoint Software
Microphone	Integrated microphone array
Network	Gigabit Ethernet
Video Inputs	HDMI
Video Outputs	HDMI
Audio Standards	G.711, G.722, AAC
Network Protocols	TCP/IP, DHCP, DNS
Audio Inputs	3.5 mm mini jack
Audio Outputs	3.5mm jack
Audio Codecs	AAC-LD, Opus
Mounting	Wall mount
Compatibility	Cisco Webex, SIP