Licensing Requirements for FC NPV
The following table shows the licensing requirements for FC NPV.
License RequirementProduct IDProduct
FC NPV requires the following:
•
FC NPV (up to 16 ports) and FCoE NPV
•
FC NPV (up to 48 ports) and FCoE NPV
For a complete explanation of the Cisco
NX-OS licensing scheme and how to obtain
and apply licensees, see the Cisco NX-OS
Licensing Guide.
Note
•
N93-16Y-SSK9
•
N93-48Y-SSK9
Cisco NX-OS
Configuring NPV
Installing the Fibre Channel Port License
This section explains how to install the licensing for FC NPV.
Before You Begin
Enabling the port license requires fibre channel (FC) ports.
Procedure
Install the license key file:
Example:
switch# install license bootflash:license_file.lic
Installing license ..done
Enabling FC NPV
FC NPV is enabled when feature-set fcoe-npv is installed and enabled.
To enable fcoe-npv, perform this task:
This enables both FC and FCoE NPV mode.Note
Cisco Nexus 9000 Series NX-OS FC NPV Configuration Guide
13
Configuring N Port Virtualization
Licensing Requirements for FC NPV
To Next Page
Loading...
