EasyManuals Logo

Cisco N9K-C93180YC-FX User Manual

Cisco N9K-C93180YC-FX
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Procedure
Step 1
switch# show san-port-channel summary | database | consistency [ details ] | usage |
compatibility-parameters
Displays SAN port channel information.
Step 2
switch# show san-port-channel database interface san-port-channel channel-number
Displays information for the specified SAN port channel.
Step 3
switch# show interface fc slot / port
Displays VSAN configuration information for the specified Fibre Channel interface.
The following example shows how to display a summary of SAN port channel information:
switch# show san-port-channel summary
------------------------------------------------------------------------------
Interface Total Ports Oper Ports First Oper Port-
san-port-channel 7 2 0
san-port-channel 8 2 0
san-port-channel 9 2 2
The following example shows how to display SAN port channel consistency:
switch# show san-port-channel consistency
Database is consistent
The following example shows how to display details of the used and unused port channel numbers:
switch# show san-port-channel usage
Totally 3 port-channel numbers used===================================Used : 77 - 79Unused:
1 - 76, 80 - 256
FLOGI Operation
When an NP port becomes operational, the switch first logs itself in to the core switch by sending a FLOGI
request (using the port WWN of the NP port).
After completing the FLOGI request, the switch registers itself with the fabric name server on the core switch
(using the symbolic port name of the NP port and the IP address of the edge switch).
The following table identifies port and node names in the edge switch used in FC NPV mode.
Table 1: Edge Switch FLOGI Parameters
Derived FromParameter
The fWWN of the NP port on the edge switch.pWWN
The VSAN-based sWWN of the edge switch.nWWN
The edge switch name and NP port interface string.
If no switch name is available, the output
will read "switch." For example, switch: fc
1/5.
Note
symbolic port name
Cisco Nexus 9000 Series NX-OS FC NPV Configuration Guide
9
Configuring N Port Virtualization
FLOGI Operation

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco N9K-C93180YC-FX and is the answer not in the manual?

Cisco N9K-C93180YC-FX Specifications

General IconGeneral
Product ModelN9K-C93180YC-FX
ManufacturerCisco
CategorySwitch
Switching Capacity3.6 Tbps
Forwarding Rate2.7 bpps
Jumbo Frames9216 bytes
VLAN IDs4096
Rack Units1 RU
AirflowFront-to-back
Form FactorRack-mountable
Operating SystemCisco NX-OS
Ports48 x 1/10/25-Gbps SFP+ and 6 x 40/100-Gbps QSFP28
Routing ProtocolBGP, IS-IS, OSPF, RIP, EIGRP
FeaturesVXLAN, EVPN
Compliant StandardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad
LatencySub-microsecond
Power SupplyInternal power supply - hot-plug

Related product manuals