Cisco NCS 1001 - Optical Time Domain Reflectometer Module

Optical PortsController
Working path input and output port [W - RX, TX]Ots 0/slot/0/1
Protected path input and output port [P - RX, TX]Ots 0/slot/0/2
Optical Time Domain Reflectometer Module
Optical Time Domain Reflectometer (OTDR) is a line card supported in NCS 1001. The line card contains
2x bidirectional OTDRs and 2x filter that combines C-band, OSC, and OTDR filters and splits OSC and
OTDR. Each internal OTDR can perform measurements on both TX and RX fiber by using an internal optical
switch. OTDR line card is connected to the OSC port on the optical amplifier. The OTDR line card can be
inserted in any slot of NCS 1001.
Hardware Installation Guide for Cisco NCS 1001
9
Cisco NCS 1001 Overview
Optical Time Domain Reflectometer Module