Step 5 Verify the following:
• Cisco NCS 1001 is not damaged.
• The cable connectors, management ports, console ports, and power connectors are not damaged.
• The SFP cages on the front panel are not damaged.
• Verify that outstanding scratch, mark, bend, discoloration or deformation has not occurred to NCS 1001.
Step 6 If there is any damage, call your Cisco sales engineer for a replacement.
Hardware Installation Guide for Cisco NCS 1001
16
Prepare to Install Cisco NCS 1001
Unpack and Verify Cisco NCS 1001
To Next Page
Loading...
