Cisco Nexus 1000V - Page 267

26-3
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 26 VSI Discovery and Configuration Protocol
VDP Troubleshooting Commands
EXAMPLES
Example 26-1 show evb vsi interface vethernet Command
switch(config)# show evb vsi interface vethernet 40
LTL : 135 [module: 2]
Segment : 30000
MAC : 0050.5693.63A1
IP : 30.0.1.2
VSI State : 3
State Machine State : 7
Rwd Expiry Count : 4621
Last CMD Time : 125
Last RSP Time : 125
Example 26-2 show evb Command
switch(config)# show evb
Edge Virtual Bridging
Role : VDP Station
VDP Mac Address : 0180.0000.0000
VDP Resource Wait Delay : 22(66 secs)
VDP Reinit Keep Alive : 21(20 secs)
Example 26-3 show run evb Command
switch(config)# show run evb
evb resource-wait-delay 24
evb reinit-keep-alive 25
ecp retransmission-timer-exponent 15
ecp max-retries 6
Example 26-4 show ecp Command
switch(config)# show ecp
ECP Max ReTries : 3
ECP Retransmition Timer Exp : 14(163840 micro seconds)
show run evb Displays the running configuration for the EVB
segmentation.
See Example 26-3 on page 26-3.
show ecp Displays the configured information for ECP.
See Example 26-4 on page 26-3.
Command Purpose