CHAPTER 3
Installing the Switch Chassis
•
Safety, page 11
•
Installation Options with Racks and Cabinets, page 12
•
Airflow Considerations, page 12
•
Installation Guidelines, page 12
•
Unpacking and Inspecting the Switch, page 13
•
Installing the Switch, page 14
•
Grounding the Chassis, page 18
•
Starting the Switch, page 20
Safety
Before you install, operate, or service the switch, see the Regulatory, Compliance, and Safety Information for
the Cisco Nexus 3000 and 9000 Series for important Safety Information.
Statement 1071—Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. Use the statement number provided at the end of each warning
to locate its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Warning
Statement 1017—Restricted Area
This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock and key, or other means of security.
Warning
Cisco Nexus 93180YC-FX NX-OS Mode Switch Hardware Installation Guide
11
To Next Page
Loading...
