Cisco Nexus 93180YC-FX - Power Cable Specifications; AC Power Cables Supported by NX-OS Mode Switches

SpecificationCharacteristic
930 WMaximum output power per power
supply
35 A (sub-cycle duration)Maximum inrush current
8 ms at 930 WMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Greater than 92% at 50% loadEfficiency rating
RSP1Form factor
Power Cable Specifications
The following sections specify the power cables that you should order and use with AC, HVAC/HVDC, and
DC power supplies.
AC Power Cables Supported by NX-OS Mode Switches
Cord Set DescriptionPower Cord Part NumberPower Type
Power Cord Jumper, C13-C14 Connectors, 6.6
feet (2.0 m)
CAB-C13-C14-2M
Power cord, C13 to C14 (recessed receptacle), 10
A, 9.8 feet (3 m)
CAB-C13-C14-AC
Cabinet jumper power cord, 250 VAC, 10 A,
C14-C13 connectors, 2.3 feet (0.7 m)
CAB-C13-CBN
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ARArgentina
250 VAC, 10 A, 3112 plug, 8.2 feet (2.5 m)CAB-9K10A-AUAustralia
250 V, 10 A, 6.9 feet (2.1 m)CAB-250V-10A-BRBrazil
250 VAC, 10 A, CEE 7/7 plug, 8.2 feet (2.5 m)CAB-9K10A-EUEuropean Union
10 A, 8.2 feet (2.5 m)CAB-IND-10AIndia
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ISIsrael
Cisco Nexus 93180YC-FX NX-OS Mode Switch Hardware Installation Guide
43
System Specifications
Power Cable Specifications