Cisco Nexus 93180YC-FX - Overview

CHAPTER 1
Overview
•
Overview, page 1
Overview
The Cisco Nexus 93180YC-FX switch (N9K-C93180YC-FX) is a 1-RU, fixed-port switch designed for
Top-of-Rack (TOR), Middle-of-Rack (MoR), and End-of-Rack (EoR) deployment in data centers. This switch
has 48 10/25-Gigabit SFP+ downlink ports that support 1-Gigabit, 10-Gigabit, and 25-Gigabit Ethernet
connections and 8-, 16-, and 32-Gigabit Fibre Channel connections, and it has six fixed 40/100-Gigabit
QSFP28 uplink ports that support combinations of 10-, 25-, 40-, 50-, and 100-Gigabit connectivity. You can
set the downlink port speeds on a port-by-port basis. The chassis for this switch includes the following
user-replaceable components:
•
Fan modules (four) with the following airflow choices:
◦
Port-side intake airflow with burgundy coloring (NXA-FAN-30CFM-B)
◦
Port-side exhaust airflow with blue coloring (NXA-FAN-30CFM-F)
• Power supply modules (two—one for operations and one for redundancy [1+1]) with the following
choices:
◦
500-W AC power supply with port-side exhaust airflow (blue coloring) (NXA-PAC-500W-PE)
◦
500-W AC power supply with port-side intake airflow (burgundy coloring) (NXA-PAC-500W-PI)
◦
1200-W HVAC/HVDC power supply with dual-direction airflow (white coloring)
(N9K-PUV-1200W)
◦
930-W DC power supply with port-side exhaust airflow (blue coloring) (NXA-PDC-930W-PE)
◦
930-W DC power supply with port-side intake airflow (burgundy coloring) (NXA-PDC-930W-PI)
Both power supplies should use the same type of power source. Do not mix AC and DC
power sources.
Note
Cisco Nexus 93180YC-FX NX-OS Mode Switch Hardware Installation Guide
1