Switch and Module Weights and Quantities
QuantityWeight per UnitComponent
117.4 lb (7.9 kg)Cisco Nexus 93180YC-FX Chassis (N9K-C93180YC-FX)
4
—
0.92 lb (0.4 kg)
0.92 lb (0.4 kg)
Fan Module
– Port-side exhaust (blue) (NXA-FAN-30CCFM-F)
– Port-side intake (burgundy) (NXA-FAN-30CCFM-B)
2 (1 for
operations
and 1 for
redundancy)
—
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
Power Supplies
– 500-W AC port-side exhaust (blue) (NXA-PAC-500W-PE)
– 500-W AC port-side intake (burgundy) (NXA-PAC-500W-PI)
– 1200-W HVAC/HVDC dual-direction (white) (N9K-PUV-1200W)
– 930-W DC port-side exhaust (blue) (NXA-PDC-930W-PE)
– 930-W DC port-side intake (burgundy) (NXA-PDC-930W-PI)
Transceiver and Cable Specifications
To determine which transceivers, adapters, and cables are supported by this switch, see https://www.cisco.com/
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see
https://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Switch Power Input Requirements
The following table lists the typical amount of power consumed by the switch, and it lists the maximum
amount of power that you must provision from the power source as input to the power supply and switch for
peak conditions.
Some power supplies might have UL listed capabilities that are greater than the maximum power
requirements for a switch. To determine the power consumption characteristics for the switch, use the
typical and maximum requirements listed in the following table.
Note
Cisco Nexus 93180YC-FX NX-OS Mode Switch Hardware Installation Guide
40
System Specifications
Switch and Module Weights and Quantities
To Next Page
Loading...
