1200-W HVAC/HVDC Power Supply Specifications
These specifications apply to the 1200-W HVAC/HVDC (N9K-PUV-1200W) power supplies.
SpecificationCharacteristic
Nominal (Range)
•
200 to 277 VAC
• –240 to –380 VDC
Input voltage
•
AC (for 1230 W output)
•
DC (for 1230 W output)
Nominal: 50 to 60 Hz (Range: 47-63 Hz)AC input frequency
35 A (cold turn on); 70 A (hot turn on)Maximum inrush current
Per power supply
•
1230 W
•
1230 W
Maximum output Watts
•
For 200 to 277 VAC
•
For 192 to 400 VDC
Per power supply
•
12 VAC at 100 A
•
12 VDC at 100 A
Power supply output voltage
•
For 200 to 277 VAC
•
For 192 to 400 VDC
12 V at 2.5 APower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum certified)Efficiency rating
RSP1Form factor
930-W DC Power Supply Specifications
These specifications apply to the following power supplies:
•
NXA-PDC-930W-PE
•
NXA-PDC-930W-PI
SpecificationCharacteristic
Nominal range: -48 to -60 VDC nominal (Range: -40 to -60 VDCDC input voltage range
23 A at -48 VDCMaximum DC input current
1104 WMaximum input W
Cisco Nexus 93180YC-FX NX-OS Mode Switch Hardware Installation Guide
42
System Specifications
1200-W HVAC/HVDC Power Supply Specifications