Cisco ONS 15454 SDH - Page 11

Contents
xi
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
CHAPTER 17 Configuring Cisco Proprietary Resilient
Packet Ring 17-1
Understanding Cisco Proprietary RPR 17-2
Role of SONET/SDH Circuits 17-2
Packet Handling Operations 17-2
Ring Wrapping 17-3
Cisco Proprietary RPR Framing Process 17-5
MAC Address and VLAN Support 17-6
Cisco Proprietary RPR QoS 17-7
CTM and Cisco Proprietary RPR 17-7
Configuring Cisco Proprietary RPR 17-7
Connecting the ML-Series Cards with Point-to-Point STS/STM Circuits 17-8
Configuring CTC Circuits for Cisco Proprietary RPR 17-8
CTC Circuit Configuration Example for Cisco Proprietary RPR 17-8
Configuring Cisco Proprietary RPR Characteristics and the SPR Interface on the ML-Series
Card 17-12
Assigning the ML-Series Card POS Ports to the SPR Interface 17-14
Creating the Bridge Group and Assigning the Ethernet and SPR Interfaces 17-15
Cisco Proprietary RPR Cisco IOS Configuration Example 17-16
Verifying Ethernet Connectivity Between Cisco Proprietary RPR Ethernet Access Ports 17-18
CRC threshold configuration and detection 17-18
Monitoring and Verifying Cisco Proprietary RPR 17-18
Add an ML-Series Card into a Cisco Proprietary RPR 17-19
Adding an ML-Series Card into a Cisco Proprietary RPR 17-22
Delete an ML-Series Card from a Cisco Proprietary RPR 17-24
Deleting an ML-Series Card from a Cisco Proprietary RPR 17-26
Understanding Cisco Proprietary RPR Link Fault Propagation 17-28
LFP Sequence 17-29
Propagation Delays 17-30
Configuring LFP 17-30
LFP Configuration Requirements 17-31
Monitoring and Verifying LFP 17-31
Cisco Proprietary RPR Keep Alive 17-32
Configuring Cisco Proprietary RPR Keep Alive 17-32
Monitoring and Verifying Cisco Proprietary RPR Keep Alives 17-33
Cisco Proprietary RPR Shortest Path 17-34
Configuring Shortest Path and Topology Discovery 17-36
Monitoring and Verifying Topology Discovery and Shortest Path Load Balancing 17-36
Understanding Redundant Interconnect 17-37