Contents
xii
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Characteristics of RI on the ML-Series Card 17-37
RI for SW RPR Configuration Example 17-38
CHAPTER
18
Configuring Ethernet over MPLS 18-1
Understanding EoMPLS 18-1
EoMPLS Support 18-3
EoMPLS Restrictions 18-3
EoMPLS Quality of Service 18-3
Configuring EoMPLS 18-4
EoMPLS Configuration Guidelines 18-5
VC Type 4 Configuration on PE-CLE Port 18-5
VC Type 5 Configuration on PE-CLE Port 18-6
EoMPLS Configuration on PE-CLE SPR Interface 18-8
Bridge Group Configuration on MPLS Cloud-facing Port 18-8
Setting the Priority of Packets with the EXP 18-9
EoMPLS Configuration Example 18-9
Monitoring and Verifying EoMPLS 18-12
Understanding MPLS-TE 18-13
RSVP on the ML-Series Card 18-13
Ethernet FCS Preservation 18-13
Configuring MPLS-TE 18-14
Configuring an ML-Series Card for Tunnels Support 18-14
Configuring an Interface to Support RSVP-Based Tunnel Signalling and IGP Flooding 18-14
Configuring OSPF and Refresh Reduction for MPLS-TE 18-15
Configuring an MPLS-TE Tunnel 18-15
MPLS-TE Configuration Example 18-16
Monitoring and Verifying MPLS-TE and IP RSVP 18-18
RPRW Alarm 18-19
CHAPTER
19
Configuring Security for the ML-Series Card 19-1
Understanding Security 19-1
Disabling the Console Port on the ML-Series Card 19-2
Secure Login on the ML-Series Card 19-2
Secure Shell on the ML-Series Card 19-2
Understanding SSH 19-2
Configuring SSH 19-3
Configuration Guidelines 19-3
Setting Up the ML-Series Card to Run SSH 19-3
To Next Page
Loading...
