Contents
xvii
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Statistics and Counters 25-6
CE-1000-4 SONET/SDH Circuits and Features 25-6
CE-1000-4 VCAT Characteristics 25-6
CE-1000-4 POS Encapsulation, Framing, and CRC 25-7
CE-1000-4 Loopback, J1 Path Trace, and SONET/SDH Alarms 25-8
CHAPTER
26
Configuring IEEE 802.17b Resilient Packet Ring 26-1
Understanding RPR-IEEE 26-1
RPR-IEEE Features on the ML-Series Card 26-2
Advantages of RPR-IEEE 26-2
Role of SONET/SDH Circuits 26-2
RPR-IEEE Framing Process 26-3
CTM and RPR-IEEE 26-6
Configuring RPR-IEEE Characteristics 26-6
Configuring the Attribute Discovery Timer 26-7
Configuring the Reporting of SONET Alarms 26-7
Configuring BER Threshold Values 26-8
Configuring RPR-IEEE Protection 26-8
Configuring the Hold-off Timer 26-9
Configuring Jumbo Frames 26-10
Configuring Forced or Manual Switching 26-11
Configuring Protection Timers 26-12
Configuring the Wait-to-Restore Timer 26-13
Configuring a Span Shutdown 26-14
Configuring Keepalive Events 26-14
Configuring Triggers for CRC Errors 26-15
Configuring QoS on RPR-IEEE 26-16
Class A 26-16
ClassB 26-17
ClassC 26-17
MQC -IEEE RPR CLI Characteristics 26-17
Configuring Traffic Rates for Transmission 26-18
Configuring Fairness Weights 26-18
Configuring RPR-IEEE Service Classes Using the Modular QoS CLI 26-19
Configuration Example for RPR-IEEE QoS 26-20
Configuration Example Using MQC to Configure Simple RPR-IEEE QoS 26-21
Configuration Example Using MQC to Configure Complex RPR-IEEE QoS 26-21
Verifying and Monitoring RPR-IEEE 26-22
Configuring RPR-IEEE End-to-End 26-30
To Next Page
Loading...
