Contents
xvi
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
E-Series Spanning Tree Parameters 23-22
E-Series Spanning Tree Configuration 23-23
E-Series Circuit Configurations 23-23
E-Series Circuit Protection 23-23
E-Series Point-to-Point Ethernet Circuits 23-24
E-Series Shared Packet Ring Ethernet Circuits 23-25
E-Series Hub-and-Spoke Ethernet Circuit Provisioning 23-25
E-Series Ethernet Manual Cross-Connects 23-26
Remote Monitoring Specification Alarm Thresholds 23-26
CHAPTER
24
CE-100T-8 Ethernet Operation 24-1
CE-100T-8 Overview 24-1
CE-100T-8 Ethernet Features 24-2
Autonegotiation, Flow Control, and Frame Buffering 24-2
Ethernet Link Integrity Support 24-3
Administrative and Service States with Soak Time for Ethernet and SONET/SDH Ports 24-4
IEEE 802.1Q CoS and IP ToS Queuing 24-5
RMON and SNMP Support 24-6
Statistics and Counters 24-6
CE-100T-8 SONET/SDH Circuits and Features 24-7
Available Circuit Sizes and Combinations 24-7
CE-100T-8 Pools 24-11
Displaying CE-100T-8 Pool Information with the STS/VT Allocation or VC4/VC LO Allocation
Tab 24-11
CE-100T-8 Pool Allocation Example 24-13
CE-100T-8 Pool Provisioning Rules 24-14
CE-100T-8 VCAT Characteristics 24-14
CE-100T-8 POS Encapsulation, Framing, and CRC 24-14
CE-100T-8 Loopback, J1 Path Trace, and SONET/SDH Alarms 24-15
CHAPTER
25
CE-1000-4 Ethernet Operation 25-1
CE-1000-4 Overview 25-1
CE-1000-4 Ethernet Features 25-2
Autonegotiation and Frame Buffering 25-3
Flow Control 25-3
Flow Control Threshold Provisioning 25-4
Ethernet Link Integrity Support 25-4
Administrative and Service States with Soak Time for Ethernet and SONET/SDH Ports 25-5
RMON and SNMP Support 25-5
To Next Page
Loading...
