Cisco RV016 - Small Business - 10/100 VPN Router Administration Guide

Firewall
Configuring Firewall Access Rules
Cisco Small Business RV0xx Series Routers Administration Guide 103
7
Configuring Firewall Access Rules
The default access rules should be sufficient for most small businesses. However,
you can use the Firewall > Access Rules page to modify or add new access rules
for your network. Access rules determine which traffic is allowed to pass through
the router’s firewall. Optionally, you can set a schedule to activate or deactivate
each access rule for specified days and times.
To open this page: Click Firewall > Access Rules in the navigation tree.
NOTE Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.
Refer to these topics:
• About Access Rules, page 103
• Managing Access Rules, page 104
• Configuring Access Rules, page 106
About Access Rules
The router has the following default rules:
• All traffic from the LAN to the WAN is allowed.
• All traffic from the WAN to the LAN is denied.
• All traffic from the LAN to the DMZ is allowed.
• All traffic from the DMZ to the LAN is denied.

Cisco RV016 - Small Business - 10/100 VPN Router Specifications

General

Brand	Cisco
Model	RV016 - Small Business - 10/100 VPN Router
Category	Network Router
Language	English