Setup
Setting Up a DMZ Host
Cisco Small Business RV0xx Series Routers Administration Guide 43
3
• Set the local time Manually: Choose this option if you want to set the local
time yourself. Then enter the following information:
- Date: Enter the current date in yyyy.mm.dd format, such as 2010.06.25
for June 25, 2010.
- Hours, Minutes, Seconds: Enter the current time in hh:mm:ss format,
such as 15:17:00 for 3:17:00 p.m.
Setting Up a DMZ Host
Use the Setup > DMZ Host page to allow one host in the LAN to be exposed to the
Internet to use services such as Internet gaming and video conferencing. Access
to the DMZ Host from the Internet can be further restricted by using firewall
access rules.
To open this page: Click Setup > DMZ Host in the navigation tree.
Enter the IP address of the network device that you want to use as a DMZ host.
NOTE Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.
To Next Page
Loading...
Need help?
General
