Restoring the Factory Default Settings
Cisco Small Business RV0xx Series Routers Administration Guide 89
5
Restoring the Factory Default Settings
Use the System Management > Factory Default page to clear all of your
configuration information and restore the router to its factory default settings. Only
use this feature if you want to discard all the settings and preferences that you
have configured.
To open this page: Click System Management > Factory Default in the
navigation tree.
STEP 1 Click Return to Factory Default Setting if you want to restore the router to its
factory default settings.
STEP 2 When the confirmation message appears, click OK to continue. If you do not want
to restore the factory default settings, click Cancel.
To Next Page
Loading...
