Assigning a Dynamic DNS Host Name to a WAN Interface
Cisco Small Business RV0xx Series Routers Administration Guide 55
3
Assigning a Dynamic DNS Host Name to a WAN Interface
Dynamic Domain Name System (DDNS) service allows you to assign a fixed
domain name to a dynamic WAN IP address, so you can host your own web, FTP
or other type of TCP/IP server in your LAN. Use the Setup > Dynamic DNS page to
configure the WAN interfaces with your Dynamic DNS information.
Before configuring Dynamic DNS on the router, you need to visit www.dyndns.org
and register a domain name. (The service is provided by DynDNS.org). For users in
China, visit www.3322.org to register.
To open this page: Click Setup > Dynamic DNS in the navigation tree.
NOTE Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.
This page displays the current settings. Click the Edit icon for the WAN interface to
display the Edit Dynamic DNS Setup page. For more information, see Editing the
Dynamic DNS Setup, page 56.
To Next Page
Loading...
Need help?
General
