Logging System Statistics
Setting Up the System Log and Alerts
Cisco Small Business RV0xx Series Routers Administration Guide 156
10
- Authorized Login: Instances when someone successfully logged into
the router configuration utility after entering the correct username and
password.
Buttons
Use the following buttons to view additional information:
• View System Log: Click this button to view the System Log. The
information appears in a new window. If the web browser displays a
warning about the pop-up window, allow the blocked content.
In the System Log window, you can use the drop-down list to choose a
particular log to display. Click Refresh to update the data, or click Clear to
erase all displayed information. When you finish viewing the log, click Close
to close the pop-up window.
Log entries include the date and time of the event, the event type, and a
message.The message specifies the type of policy, such as Access Rule,
the LAN IP address of the source (SRC), and the MAC address
• Outgoing Log Table: Click this button to view the outgoing packet
information. The information appears in a new window.
In the Outgoing Log Table window, you can click Refresh to update the
data. When you finish viewing the log, click Close to close the pop-up
window.
• Incoming Log Table: Click this button to display the incoming packet
information. The information appears in a new window. If the web browser
displays a warning about the pop-up window, allow the blocked content.
In the Incoming Log Table window, you can click Refresh to update the
data. When you finish viewing the log, click Close to close the pop-up
window.
• Clear Log Now: Click this button to clear out your log without emailing it.
Use this button only if you do not want to view the information again in the
future.
To Next Page
Loading...
Need help?
General
