Setup
Setting Up Universal Plug and Play (UPnP)
Cisco Small Business RV0xx Series Routers Administration Guide 50
3
Adding a service
To add a new entry to the Service list, or to change an entry that you created
previously, click Service Management. If the web browser displays a warning
about the pop-up window, allow the blocked content.
In the Service Management window, add or update entries as needed. Before
closing this window, click OK to save your settings, or click Cancel to undo them.
Any unsaved changes are abandoned.
• To add a service to the list: Enter the following information, and then click
Add to List. You can have up to 30 services in the list.
- Service Name: Enter a short description.
- Protocol: Choose the required protocol. Refer to the documentation for
the service that you are hosting.
- Port Range: Enter the required port range.
• To add another new service: Enter the information, and then click Add to
list.
To Next Page
Loading...
Need help?
General
