Backing Up and Restoring the Settings
Cisco Small Business RV0xx Series Routers Administration Guide 94
5
• If a setting is changed, the time counter resets, and the next automatic copy
will occur 24 hours later.
• If the mirror config file is still in its factory default state, copying the mirror to
the startup immediately resets the router to the factory default settings.
To copy a file, click the button:
• Copy Startup to Mirror: Click this button to replace the mirror file with the
startup file. The copy operation is performed immediately, with no option to
cancel. When the operation is finished, the browser page refreshes.
• Copy Mirror to Startup: Click this button to replace the startup file with the
mirror file. The copy operation is performed immediately, with no option to
cancel. After a short time, the router restarts. If your PC is unable to
immediately reload the login page, re-enter the IP address for the
configuration utility in the Address bar. Then log in.
To Next Page
Loading...
Need help?
General
