10
Cisco Small Business 300 Series Managed Switch Administration Guide 101
Managing Power-over-Ethernet Devices
The Power over Ethernet (PoE) feature is only available on PoE-based devices. For
a list of PoE-based devices, refer to the Switch Models section.
This chapter describes how to use the PoE feature.
It includes the following topics:
• PoE on the Switch
• Configuring PoE Properties
• Configuring the PoE Power, Priority, and Class
PoE on the Switch
A PoE switch is PSE (Power Sourcing Equipment) that delivers electrical power to
connected PD (Powered Devices) over existing copper cables without interfering
with the network traffic, updating the physical network or modifying the network
infrastructure.
PoE Features
PoE provides the following features:
• Eliminates the need to run 110/220 V AC power to all devices on a wired
LAN.
• Removes the necessity for placing all network devices next to power
sources.
• Eliminates the need to deploy double cabling systems in an enterprise
significantly decreasing installation costs.
To Next Page
Loading...
