Cisco SF 300-08 User Manual

Console Menu Interface
Console Interface Main Menu
Cisco Small Business 300 Series Managed Switch Administration Guide 309
20
TraceRoute IPv4
Path: Switch Main Menu > System Configuration Menu > IP Configuration >
Network Configuration > TraceRoute IPv4
Use the TraceRoute IPv4 option to enter the IPv4 address for the network route
you want to trace.
Select Execute to begin the test. The results are displayed in the Status field.
After the traceroute test is complete, it displays the IP address, status, and
statistics of the traceroute test.
TraceRoute IPv6
Path: Switch Main Menu > System Configuration Menu > IP Configuration >
Network Configuration > TraceRoute IPv6
Use the TraceRoute IPv6 option to enter the IPv6 address for the network route
you want to trace.
Select Execute to begin the test. TraceRoute displays the IP address, status, and
statistics of the traceroute test in the Status and Results fields.
Telnet Session
Path: Switch Main Menu > System Configuration Menu > IP Configuration >
Network Configuration > Telnet Session
Use Telnet S es si o n Configuration to enter the IP Address of the location you want
to reach by using a Telnet connection.
IPv4 Default Route (Layer 3 devices only)
Path: Switch Main Menu > System Configuration Menu > IP Configuration >
IPv4 Default Route
Use IPv4 Default Route to set the Next Hop IP Address for the switch.

Cisco SF 300-08 Specifications

General

Brand	Cisco
Model	SF 300-08
Category	Switch
Language	English