Cisco SGE2000 Configuration Guide

CHAPTER 2
Configuring the Fabric Extender
This chapter describes how to configure a Cisco Nexus 2000 Series Fabric Extender using a parent Cisco
Nexus 7000 Series device and includes the following sections:
• Configuring the Cisco Nexus 2000 Series Fabric Extender, page 13
• Verifying the Configuration, page 26
• Additional References, page 33
Configuring the Cisco Nexus 2000 Series Fabric Extender
This section describes how to configure the Fabric Extender.
Managing the Fabric Extender Feature Set
You can install and manage the Fabric Extender feature set.
SUMMARY STEPS
1.
Installing the Fabric Extender Feature Set, on page 14
2.
Enabling the Fabric Extender Feature Set, on page 15
3.
(Optional) Disallowing the Fabric Extender Feature Set, on page 15
DETAILED STEPS
Step 1
Installing the Fabric Extender Feature Set, on page 14
Step 2
Enabling the Fabric Extender Feature Set, on page 15
Step 3
(Optional) Disallowing the Fabric Extender Feature Set, on page 15
Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide
OL-25816-02 13

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg