Cisco SGE2000 Configuration Guide

RMA Code : 200-32-32-32
Power supply specific block:
Block Signature : 0x0
Block Version : 0
Block Length : 0
Block Checksum : 0x0
Feature Bits : 0x0
Current 110v : 36
Current 220v : 36
Stackmib OID : 0
Additional References
This section includes additional information that is related to configuring the Cisco Nexus 2000 Series Fabric
Extender.
Related Documents
Document TitleRelated Topic
Cisco NX-OS Licensing Guide
Cisco NX-OS Licensing
Cisco Nexus 7000 Series NX-OS Virtual Device Context Configuration
Guide
Virtual device contexts (VDC)
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide
Interface configuration
Cisco Nexus 7000 Series Command References available at the following
URL: http://www.cisco.com/en/US/products/ps9402/prod_command_
reference_list.html
Command reference
Feature History
This table lists the release history for this feature.
Table 2: Feature History for the Cisco Nexus 2000 Series Fabric Extender
Feature InformationReleasesFeature Name
Support was added when the FEX is connected to the
48-port, 100/1000BASE-T (100-Mb/1-Gigabit)
N2248TP-E and 32-port 10-Gigabit SFP+
N2248TP-E.
6.1(1)Support for the Cisco Nexus 7000 Series
Support for M2 series modules.6.1(1)Support for M2 series modules
Support was added when the FEX is connected to the
48-port, 1/10-Gigabit F2 module (N7K-F248XP-25).
6.0(1)Support for the Cisco Nexus 7000 Series
Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide
OL-25816-02 33
Configuring the Fabric Extender
Additional References

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg