Cisco SGE2000 Configuration Guide

Feature InformationReleasesFeature Name
Support was added when the FEX is connected to the
32-port, 10-Gigabit M1 module (N7K-M132XP-12)
or the 32-port, 10-Gigabit M1 XL module
(N7K-M132XP-12L).
5.1(1)Support for the Cisco Nexus 7000 Series
The Fabric Extender is enabled on the parent Cisco
Nexus 7000 Series device with the install feature-set
and feature-set commands.
5.1(1)Feature set commands
Support was added for port channels and the
integration of vPC on the host interfaces.
5.2(1)Port channel and vPC support
Layer 3 capability was added to the Fabric Extender
host interface ports including IPv4 and IPv6 and
IGMP snooping.
5.2(1)Layer 3 support
Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide
34 OL-25816-02
Configuring the Fabric Extender
Feature History

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg