Cisco SGE2000 Configuration Guide

Eth101/1/30 Down Po101 Po101
Eth101/1/31 Down Po101 Po101
Eth101/1/32 Down Po101 Po101
Eth101/1/33 Down Po101 Po101
Eth101/1/34 Down Po101 Po101
Eth101/1/35 Down Po101 Po101
Eth101/1/36 Down Po101 Po101
Eth101/1/37 Down Po101 Po101
Eth101/1/38 Down Po101 Po101
Eth101/1/39 Down Po101 Po101
Eth101/1/40 Down Po101 Po101
Eth101/1/41 Down Po101 Po101
Eth101/1/42 Down Po101 Po101
Eth101/1/43 Down Po101 Po101
Eth101/1/44 Down Po101 Po101
Eth101/1/45 Down Po101 Po101
Eth101/1/46 Down Po101 Po101
Eth101/1/47 Down Po101 Po101
Eth101/1/48 Down Po101 Po101
Logs:
09/21/2010 21:14:26.843850: Module register received
09/21/2010 21:14:26.845778: Registration response sent
09/21/2010 21:14:27.663073: Module Online Sequence
09/21/2010 21:14:30.191121: Module Online
This example shows how to display the Fabric Extender interfaces pinned to a specific switch interface:
switch# show interface port-channel 101 fex-intf
Fabric FEX
Interface Interfaces
---------------------------------------------------
Po101 Eth101/1/2 Eth101/1/1
This example shows how to display the switch interfaces that are connected to a Fabric Extender uplink:
switch# show interface fex-fabric
Fabric Fabric Fex FEX
Fex Port Port State Uplink Model Serial
---------------------------------------------------------------
101 Eth2/1 Active 1 N2K-C2248TP-1GE JAF1418AARL
101 Eth2/2 Active 2 N2K-C2248TP-1GE JAF1418AARL
101 Eth4/1 Active 3 N2K-C2248TP-1GE JAF1418AARL
101 Eth4/2 Active 4 N2K-C2248TP-1GE JAF1418AARL
This example shows how to display the SFP+ transceiver and diagnostic optical monitoring (DOM) information
for Fabric Extender uplinks for an SFP+ transceiver that is plugged into the parent switch interface:
switch# show interface ethernet 1/40 transceiver
Ethernet1/40
sfp is present
name is CISCO-MOLEX INC
part number is 74752-9026
revision is A0
serial number is MOC13321057
nominal bitrate is 12000 MBits/sec
Link length supported for copper is 3 m(s)
cisco id is --
cisco extended id number is 4
This example shows how to display the SFP+ transceiver and DOM information for Fabric Extender uplinks
for an SFP+ transceiver that is plugged into the uplink port on the Fabric Extender:
switch# show interface ethernet 1/40 transceiver fex-fabric
Ethernet1/40
sfp is present
name is CISCO-MOLEX INC
part number is 74752-9026
revision is A0
serial number is MOC13321057
nominal bitrate is 12000 MBits/sec
Link length supported for 50/125mm fiber is 0 m(s)
Link length supported for 62.5/125mm fiber is 0 m(s)
Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide
28 OL-25816-02
Configuring the Fabric Extender
Verifying the Fabric Extender Configuration

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg