Cisco SIP IP Phone - Page 4

Contents
ii
Cisco SIP IP Phone Administrator Guide
Character Support 1-10
Supported Protocols 1-11
Prerequisites 1-12
Cisco SIP IP Phone Connections 1-12
Connecting to the Network 1-13
Network Port (10/100 SW) 1-13
Access Port (10/100 PC) 1-13
Connecting to Power 1-13
Using a Headset 1-14
The Cisco SIP IP Phone with a Catalyst Switch 1-14
CHAPTER 2 Getting Started with Your Cisco SIP IP Phone 2-1
Initialization Process Overview 2-1
Installing the Cisco SIP IP Phone 2-2
Installation Task Summary 2-2
Downloading Files to Your TFTP Server 2-3
Configuring SIP Parameters 2-3
Configuring SIP Parameters via a TFTP Server 2-4
Manually Configuring the SIP Parameters 2-7
Configuring Network Parameters 2-9
Configuring Network Parameters via a DHCP Server 2-10
Manually Configuring the Network Parameters 2-10
Connecting the Phone 2-11
Adjusting the Placement of the Cisco SIP Phone 2-12
Verifying Startup 2-14
Using the Cisco SIP IP Phone Menu Interface 2-15
Reading the Cisco SIP IP Phone Icons 2-15
Customizing the Cisco SIP IP Phone Ring Types 2-17
Creating Dial Plans 2-17
CHAPTER 3 Managing Cisco SIP IP Phones 3-1
Changing Your Configuration 3-1
Modifying the Phone’s Network Settings 3-2
Entering Configuration Mode 3-2
Unlocking Configuration Mode 3-2
Locking Configuration Mode 3-2
Changing the Network Settings 3-2
Modifying the Phone’s SIP Settings 3-5