Cisco SIP IP Phone User Manual

3-41
Cisco SIP IP Phone Administrator Guide
Chapter 3 Managing Cisco SIP IP Phones
Erasing the Locally Defined Settings
The following is a sample configuration for a relative DST configuration:
; sip default configuration file
(additional configuration text omitted)
time_zone : PST
dst_offset : 01/00
dst_start_month : April
dst_start_day : 0
dst_start_day_of_week : Sunday
dst_start_week_of_month : 1
dst_start_time : 02/00
dst_stop_month : October
dst_stop_day : 0
dst_stop_day_of_week : Sunday
dst_stop_week_of_month : 8
dst_stop_time : 02/00
dst_stop_autoadjust : 1
(additional configuration text omitted)
Erasing the Locally Defined Settings
You can erase the locally defined network settings and the SIP settings that have been configured in the
phone.
Erasing the Locally Defined Network Settings
When you erase the locally defined settings, the values are reset to the defaults.
Before You Begin
• Unlock configuration mode as described in the “Unlocking Configuration Mode” section on
page 3-2.
• If DHCP has been disabled on a phone, clearing the phone’s settings reenables it.
• Select the Erase Config parameter by pressing the down arrow to scroll to and highlight the
parameter or by pressing the number that represents the parameter (located to the left of the
parameter name on the LCD).
Step 1 Press the settings key. The Settings menu appears.
Step 2 Highlight Network Configuration.
Step 3 Press the Select soft key. The Network Configuration settings are displayed.
Step 4 Highlight Erase Configuration.
Step 5 Press the Ye s soft key.
Step 6 Press the Save soft key. The phone programs the new information into Flash memory and resets.

Cisco SIP IP Phone Specifications

General

Brand	Cisco
Model	SIP IP Phone
Category	IP Phone
Language	English