viii
Cisco SIP IP Phone Administrator Guide
Preface
Objectives
Objectives
The Cisco SIP IP Phone Administrator Guide provides necessary information to get the Cisco SIP IP
phone operational in a Voice-over-IP (VoIP) network.
It is not the intent of this administrator guide to provide information on how to implement a SIP VoIP
network. For information on implementing a SIP VoIP network, refer to the documents listed in the
“Related Documentation” section on page viii.
Document Organization
Table 1 lists the chapters and appendixes in this document:
Related Documentation
The following is a list of related Cisco SIP VoIP publications. For more information about implementing
a SIP VoIP network, refer to the following publications:
• Session Initiation Protocol Gateway Call Flows
• Cisco IP Phone 7960 and 7940 Series At a Glance
• Regulatory Compliance and Safety Information for the Cisco IP Phone 7960, 7940, and 7910 Series
• Installing the Wall Mount Kit for the Cisco IP Phone
Table 1 Document Organization
Section Title Description
Chapter 1 Product Overview Describes SIP and the Cisco SIP IP phone.
Chapter 2 Getting Started with Your Cisco SIP IP Phone Describes how to install, connect, and configure the
Cisco SIP IP phone.
Chapter 3 Managing Cisco SIP IP Phones Describes how to modify the Cisco SIP IP phone’s
network and SIP settings, how to access network and
call status information, and how to upgrade the
firmware.
Appendix A SIP Compliance with RFC 3261 Information Provides reference information about the SIP IP phone
compliance to RFC 3261.
Appendix B SIP Call Flows Provides reference information about the SIP IP phone
call flows.
Appendix C Technical Specifications Lists the physical and operating environment
specifications, cable specifications, and connection
specifications
Appendix D Translated Safety Warnings Lists translated safety warnings that should be
followed when installing an electrical device such as
the SIP IP phone.
To Next Page
Loading...
Need help?
General