Cisco SIP IP Phone User Manual

3-11
Cisco SIP IP Phone Administrator Guide
Chapter 3 Managing Cisco SIP IP Phones
Modifying the Phone’s SIP Settings
callerid_blocking Optional Whether the Caller ID Blocking feature is enabled or
disabled by default on the phone. When enabled, the
phone blocks its number or e-mail address from phones
that have caller identification capabilities. Valid values
are:
• 0—The Caller ID Blocking feature is disabled by
default, but can be turned on and off via the phone’s
user interface. When disabled, the caller
identification is included in the Request-URI header
field.
• 1—The Caller ID Blocking feature is enabled by
default, but can be turned on and off via the phone’s
user interface. When enabled, “Anonymous” is
included in place of the user identification in the
Request-URI header field.
• 2—The Caller ID Blocking feature is disabled
permanently and cannot be turned on and off locally
via the phone’s user interface. If specifying this
value, specify this parameter in the phone-specific
configuration file.
• 3—The Caller ID Blocking feature is enabled
permanently and cannot be turned on and off locally
via the phone’s user interface. If specifying this
value, specify this parameter in the phone-specific
configuration file.
The default value is 0.
cnf_join_enable Optional Specifies when the conference bridge hangs up whether
or not it should attempt to join the two leaf nodes. Valid
values are:
• 0—Do not join two leaf nodes.
• 1—Join two leaf nodes.
The default value is 1, or join two leaf nodes.
date_format Optional The format to use for dates. Valid values are:
• M/D/Y—Month/day/year
• D/M/Y—Day/ month/year
• Y/M/D—Year/month/day
• Y/D/M—Year/day/month
• Y-M -D—Year-month-day
• YY-M-D—4-digit year-month-day
The default is M/D/Y.
Table 3-3 Default SIP Configuration File Parameters (continued)
Parameter
Required or
Optional Description

Cisco SIP IP Phone Specifications

General

Brand	Cisco
Model	SIP IP Phone
Category	IP Phone
Language	English