3-34
Cisco SIP IP Phone Administrator Guide
Chapter 3 Managing Cisco SIP IP Phones
Using the Command-Line Interface
show command keywords (continued) • register: Shows the current registration status of SIP
lines.
• network: Shows network information, such as phone
platform, DHCP server, phone IP address and subnet
mask, default GW, address of the TFTP server, phone
MAC address, domain name, and phone name.
• config: Shows the current Flash configuration, including
network information, phone label and password, SNTP
server address, DST information, time and date format,
and input and output port numbers.
• personaldir: Displays the current contents of the
personal directory. This command can be used only if the
telnet_level parameter is set to allow privileged
commands to be executed.
• dialplan: Shows the phone’s dial plan.
• timers: Shows the current status of the platform timers
Table 3-7 CLI Commands (continued)
Command Purpose
To Next Page
Loading...
