Install Cisco ISE Software on Cisco SNS Appliances
Install Cisco ISE on the Cisco SNS 3515 or 3595 Appliance
The Cisco SNS 3515 and Cisco SNS 3595 appliances are preinstalled with the ISE software. This section
gives you an overview of the installation process and the tasks that you must perform before installing ISE.
Before you begin installing ISE, you must:
Step 1 Open the box and check the contents. See Unpack and Inspect the Server, on page 10.
Step 2 Read about the Cisco SNS 3500 Series Appliances, on page 1.
Step 3 Read the general precautions and safety warnings in Before You Begin, on page 9.
Step 4 Install the appliance in the rack. See Prepare for Server Installation, on page 11.
Step 5 Connect the Cisco SNS-3515 or Cisco SNS-3595 to the network and appliance console. See Connect Cables, on page
19.
Step 6 Power up the Cisco SNS-3515 or Cisco SNS-3595 appliance. See Connect and Power On the Cisco SNS 3515 or 3595
Appliance, on page 22.
Step 7 Run the setup command at the CLI prompt to configure the initial settings for the ISE server. See Run the Setup Program,
on page 32. The setup can be done by using the appliance console or CIMC.
You can use the Cisco UCS Server Configuration Utility, Release 3.0 User Guide to configure the Cisco SNS-3515 or
Cisco SNS-3595 appliance. You can also see the Cisco UCS C-Series Rack Server guides for more information on Cisco
SNS-3515 or Cisco SNS-3595 appliance.
Download the Cisco ISE ISO Image
Download the ISO image to install Cisco ISE on Cisco SNS appliance.
Step 1 Go to http://www.cisco.com/go/ise. You must already have valid Cisco.com login credentials to access this link.
Step 2 Click Download Software for this Product
The Cisco ISE software image comes with a 90-day evaluation license already installed, so you can begin testing all
Cisco ISE services when the installation and initial configuration is complete.
Install the ISE Server
After you download the Cisco ISE ISO image, you can use any of the following options to install and set up
the Cisco ISE software on your appliance:
Install Cisco ISE Software on Cisco SNS Appliances
28
Install Cisco ISE Software on Cisco SNS Appliances
Install Cisco ISE Software on Cisco SNS Appliances
To Next Page
Loading...
Need help?
General