22
(Optional) Connecting Wired and Wireless Headsets
The Cisco SPA 303 supports headsets from different manufacturers. For the latest supported
models, contact your reseller. Additional information can be found at the manufacturer’s
websites:
http://www.plantronics.com
http://www.jabra.com
Each brand and type of headset may require different steps for connection. Consult the
documentation for your particular headset for more information.
In general, to connect a headset. connect the 2.5mm connector from the headset into the
headset port on the right side of the IP phone as shown in the following graphic:
To Next Page
Loading...
Need help?
General
