Version 2.1 28 of 33
Creating and using speed dials
You can assign unused line buttons on your phone to act as a speed dial. Depending on how your
extensions are set up, you can have up to two speed dials in place.
When a speed dial’s assigned to a number, that, when pressed on the keypad, dials the number assigned to
it. You can have up to 8 of these speed dials. Each speed dial can be a phone number, IP address or URL.
Creating speed dials on unused line buttons
1. Press the unused line button and hold down for three seconds - the ‘Def. Speed Dial’ window will
be displayed.
2. Enter a name for the speed dial.
3. Press the down arrow key to reach the phone number field, then enter the phone number and
press ‘save’.
4. Once a speed dial has been created, it will be displayed next to the line button – then just press
the line button when you want to use the speed dial.
Creating numerical speed dials
1. Press the Setup button
2. Scroll to ‘Speed Dial’ and press ‘select’
3. To add a new speed dial, scroll to ‘Select an unused speed dial location’ (2 through 9) and press
‘edit’.
4. Enter the phone number and press ‘ok’.
To Next Page
Loading...
