EasyManua.ls Logo

Cisco SPA 514G - Changing the Date and Time; Restarting Your Phone; Viewing Phone, Network and Call Information; Viewing Phone Information

Cisco SPA 514G
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 2.1 30 of 33
Changing the date and time
The date and time for your phone will be set by Vodafone One Net.
Restarting your phone
Occasionally you may need to restart your phone if the screen locks up. To restart your phone:
1. Press the Setup button
2. Scroll to ‘Restart’ and press ‘select’
3. Press ‘ok’ to confirm.
Viewing phone, network and call information
Viewing phone information
1. Press the Setup button.
2. Scroll to ‘Product Infoand press ‘select you’ll then see the following information:
o Product name
o Serial number
o Software version
o Hardware version
o MAC (hardware) address
o Certificate
o Customisation
Viewing network information
1. Press the Setup button.
2. Scroll to ‘Network’ and press ‘select’ - you’ll then be able to see the following information:
o IP address
o Host Name
o Domain
o Subnet mask
o Default router
Viewing phone line and extension information
1. Press the Setup button
2. Scroll to ‘Status’ and press ‘Select’ - you’ll then be able to see the following information:
o Phone status up time and packets sent/received
o Extension status this will tell you if an extension’s been registered and when
o Line status active calls and call information
o Provisioning status If a profile rule was used, and the status
o Call statistics history this details information about individual calls

Table of Contents

Related product manuals