Version 2.1 29 of 33
Customising your LCD screen
You can customize your LCD screen in the ways described below.
Changing the LCD screen contrast
To adjust the contrast of the LCD screen:
1. Press the ‘Setup’ button.
2. Scroll to ‘LCD Contrast’ and press ‘select’.
3. Use the left and right arrow keys to change the contrast.
4. Press ‘save’.
Configuring the phone screen saver
You can enable your phone’s screen saver and specify its appearance and the amount of time for the
phone to be idle before it begins.
To configure your screen saver:
1. Press the ‘Setup’ button.
2. Scroll to ‘Screen Saver Mode’ and press ‘select’.
3. Scroll to ‘Enable Screen Saver’.
4. Press the ‘edit’ key followed by the ‘y/n’ key to set enable screen saver to ‘Yes’.
5. Press ‘ok’.
6. Scroll to ‘Screen Saver Wait Time’.
7. Press the ‘edit’ key and enter the number of seconds that the phone remains idle before the
screen saver turns on.
8. Press ‘ok’.
9. Scroll to ‘Screen Saver Icon’.
10. Press the ‘edit’ key followed by the ‘option’ key to change between the screen saver modes:
o Background Picture – Shows the background picture.
o Station Time – Shows the time.
o Lock – Shows a padlock icon around the screen.
o Phone – Shows a phone icon around the screen.
o Date Time – Shows the date and time.
11. Press ‘ok’ and then ‘save’.
Using ringtones
Each extension of your phone can have a different ring tone. To change a ring tone:
1. Press the ‘Setup’ button.
2. Scroll to ‘Ring Tone’ and press ‘select’.
3. Scroll to the extension for which you want to select a ring tone and press the ‘change’ key.
4. Scroll through the ring tones and press ‘play’ to play the highlighted ring tone. Press ‘select’ to
choose the highlighted ringtone for that extension.
To Next Page
Loading...
