Cisco SPA100 Series Provisioning Guide

Voice Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 112
6
<Speed_Dial_2_1_> through <Speed_
Dial_9_1_>
<Speed_Dial_2_2_> through <Speed_
Dial_9_2_>
<FAX_CNG_Detect_Enable_1_>
Target phone number (or URL) assigned to speed dial 2, 3, 4,
5, 6, 7, 8, or 9.
Default setting: blank
<CW_Setting_1_>
<CW_Setting_2_>
Call Waiting on/off for all calls.
Default setting: yes
<Block_CID_Setting_1_>
<Block_CID_Setting_2_>
Block Caller ID on/off for all calls.
Default setting: no
<Block_ANC_Setting_1_>
<Block_ANC_Setting_2_>
Block Anonymous Calls on or off.
Default setting: no
<DND_Setting_1_>
<DND_Setting_2_>
DND on or off.
Default setting: no
<CID_Setting_1_>
<CID_Setting_2_>
Caller ID Generation on or off.
Default setting: yes
<CWCID_Setting_1_>
<CWCID_Setting_2_>
Call Waiting Caller ID Generation on or off.
Default setting: yes
<Dist_Ring_Setting_1_>
<Dist_Ring_Setting_2_>
Distinctive Ring on or off.
Default setting: yes

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English