Cisco SPA100 Series Provisioning Guide

Router Configuration Parameters
<Internet_Option> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 158
7
<MAC_Address_Clone> Example: MAC Address Clone
enabled
<router-configuration>
...
<MAC_Address_Clone>
<MAC_Address_Clone_Enabled>1</MAC_Address_Clone_Enabled>
<MAC_Address_Clone_Address>00:22:68:19:EF:83</MAC_Address_Clone_Address>
</MAC_Address_Clone>
...
</router-configuration>
<Internet_Option> Parameters
This section describes the parameters in the <Internet_Option> section of the
config.xml file.
TIP: You can click the <Internet_Option> heading in the XML file to expand or
collapse the nested parameters in this section.
NOTE In addition to the descriptions, also refer to <Internet_Option> Example:,
page 160.
Parameter Details
<Host_Name> Description: The name of the ATA
User Interface: Network Setup > Basic Setup > Internet Settings
page, Host Name field
Values: name
Default: model number
Example:
<Host_Name>SPA112</Host_Name>

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English