Cisco SPA100 Series Provisioning Guide

Router Configuration Parameters
<VPN_Passthrough>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 185
7
<VPN_Passthrough>
This section describes the parameters in the <VPN_Passthrough> section of the
config.xml file.
NOTE In addition to the descriptions, also refer to <VPN_Passthrough> Example: All
passthrough options enabled, page 186.
Parameter Details
<IPSec_Passthrough> Description: Enables or disables VPN passthrough for Internet
Protocol Security (IPsec)
User Interface: Network Setup > Advanced Settings > VPN
Passthrough page, IPsec Passthrough field
Values:
0: Disabled
1: Enabled
Default: 1
Example:
<IPSec_Passthrough>1</IPSec_Passthrough>
<PPTP_Passthrough> Description: Enables or disables VPN passthrough for Point-to-Point
Tunneling Protocol (PPTP)
User Interface: Network Setup > Advanced Settings > VPN
Passthrough page, PPTP Passthrough field
Values:
0: Disabled
1: Enabled
Default: 1
Example:
<PPTP_Passthrough>1</PPTP_Passthrough>

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English