Cisco SPA100 Series Provisioning Guide

Router Configuration Parameters
<Time_Setup> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 176
7
<Time_Setup> Parameters
This section describes the parameters in the <SNMP> section of the config.xml
file.
NOTE In addition to the descriptions, also refer to <Time_Setup> Example: Germany
Time Zone with Daylight Savings and Auto-Recovery Enabled, page 178.
Parameter Details
<Time_Zone> Description: The time zone for the site where the ATA is in operation
User Interface: Network Setup > Basic Setup > Time Settings
page, Time Zone field
Values: number identifying the time zone
See Appendix B, “Time Zone Settings.”.
Default: -08 1 1
Example: Germany
<Time_Zone>+01 2 2</Time_Zone>
<Auto_Adjust_Clock> Description: Enables or disables automatic time adjustments for
daylight savings time
User Interface: Network Setup > Basic Setup > Time Settings
page, Adjust Clock for Daylight Saving Changes field
Values:
0: Disabled
1: Enabled
Default: 1
Example: Automatic Daylight Saving adjustment enabled
<Auto_Adjust_Clock>1</Auto_Adjust_Clock>

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English